Да ли су вам стандарди потребни у вашем послу?
Не знам
Укупан број гласова: 7466

Пријавите се!

SRPS EN 62612:2013

Статус: Објављен
Језик: Engleski
Бр. страна: 95
Датум: 29.11.2013.
Службени гласник: 106/13
Број решења:
Издање: 1 ED
Веза са међународним стандардима
Ovaj standard je identičan sa:
EN 62612:2013   CLC/TC 34
Цена: 4920 RSD

За читање онлајн


Наслов на српском језику

Sijalice sa svetlećim diodama i sa ugrađenim predspojnim uređajem, za opšte osvetljenje, sa naponom napajanja > 50 V — Zahtevi za performanse

Наслов на енглеском језику

Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements

Апстракт на српском језику

IEC 62612:2013 precizira zahteve za performanse, zajedno sa metodama i uslovima, potrebnim da se pokaže usaglašenost sa sijalicama sa svetlećim diodama integrisanim sa sredstvima za stabilan rad, namenjenim za domaćinstva i slične svrhe opšteg osvetljenja koje imaju: — procenjenu snagu do 60 W; — nazivni napon > 50 V naizmenične struje sve do 250 V naizmenič¬ne struje; — sa podnoškom za sijalice, onako kako je to navedeno u IEC 62560.

Апстракт на енглеском језику

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having: - a rated power up to 60 W; - a rated voltage of > 50 V a.c. up to 250 V a.c.; - a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC/PAS 62612. a) The standard explicitly states that real life time tests are not part of the test regime. Instead, a period of up to 6 000 h is chosen in order to assess manufacturers'' claims of maintenance. b) Technical features have been adapted to IEC/PAS 62717 (performance of LED modules) as far as possible. Examples are the family approach and the temperature measuring point. c) Marking requirements are shifted from the product to the packaging. d) The number of lamps to be tested is made test specific, not general. e) First requirements are given for setting the colour for colour adjustable lamps and the luminous flux level of dimmable lamps. f) The structure of tests is clearly divided between requirement and compliance. g) Statistical compliance is separated into individual and average. h) Light output requirements are extended to luminous intensity distribution, peak intensity, beam angle and efficacy. i) The use of the terms ''correlated colour temperature'' and ''chromaticity coordinates'' is corrected. j) The number of tolerance categories is reduced from 8 to 4, and split between initial and maintained values. k) Colour rendering is differently assessed at initial and maintained state. l) Three lumen maintenance categories are given instead of five. m) The endurance tests are completely re-established. n) The verification (formerly: assessment) clause is completed. o) Information for luminaire design is added. p) Stabilisation is more precise (Annex A on the method of measuring lamp characteristics) and extension is made for the additional photometric and colorimetric parameters. q) Annex B on measuring luminous flux is contained in Annex A. New Annex B provides the photometric code. r) Further annexes are added: Annex C and D for displacement factor, Annex E for life time metrics/reliability and Annex F for examples of LED dies and LED packages.

Комисија за стандарде



Нема информација.

Национални пропис

Нема информација.

Национална активност

Нема информација.


ugrađeni predspojni uređaj, svetleća dioda, > 50 V, performansa