Да ли су вам стандарди потребни у вашем послу?
Да
Не
Понекад
Не знам
Укупан број гласова: 7309

Пријавите се!
 

SRPS EN 14276-1:2012

Статус: Објављен
Језик: Engleski
Бр. страна: 86
Датум: 25.07.2012.
Службени гласник: 80/12
Број решења:
Издање: 2 ED
Веза са међународним стандардима
Ovaj standard je identičan sa:
EN 14276-1:2006+A1:2011   CEN/TC 182
Цена: 4920 RSD

За читање онлајн

Одштампај

Наслов на српском језику

Oprema pod pritiskom za sisteme za hlađenje i toplotne pumpe - Deo 1: Posude - Opšti zahtevi

Наслов на енглеском језику

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

Апстракт на српском језику

Ovaj standard utvrđuje zahteve za materijale, proektovanje, proizvodnju, ispitivanja i dokumentaciju koja se primenjuju na nepokretne posude pod pritiskom namenjene za sisteme za hlađenje i toplotne pumpe.

Апстракт на енглеском језику

This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for stationary pressure vessels intended for use in refrigerating systems and heat pumps. These systems are referenced in this standard as refrigerating systems as defined in EN 378-1. This European Standard applies to vessels including welded or brazed attachments up to and including the nozzle flanges, screwed, welded or brazed connectors or to the edge to be welded or brazed at the first circumferential joint connecting piping or other elements. This European Standard applies to pressure vessels with an internal pressure down to - 1 bar, to account for the evacuation of the vessel prior to charging with refrigerant. This European Standard applies to both the mechanical loading conditions and thermal conditions as defined in EN 13445-3 associated with refrigerating systems. It applies to pressure vessels subject to the maximum allowable temperatures for which nominal design stresses for materials are derived using EN 13445-2 and EN 13445-3 or as specified in this standard. In addition vessels designed to this standard should have a maximum design temperature not exceeding 200 °C and a maximum design pressure not exceeding 64 bars. Outside of these limits, it is important that EN 13445 be used for the design, construction and inspection of the vessel. Under these circumstances it is important that the unique nature of refrigerating plant, as indicated in the introduction to this standard, also be taken into account. It is important that pressure vessels used in refrigerating systems and heat pumps of category less than II as defined in Annex H comply with other relevant clauses of EN 378-2 for vessels. This European Standard applies to pressure vessels where the main pressure bearing parts are manufactured from metallic ductile materials as defined in Clause 4 and Annex I of this standard. This European Standard does not apply to vessels of the

Комисија за стандарде


ICS



Директиве



Национални пропис



Национална активност



Дескриптори

definicije, projektovanje, dokumentacija, toplotne pumpe, materijali, oprema pod pritiskom, posude pod pritiskom, rashladna postrojenja, zahtevi za bezbednost, ispitivanje, posude, rezervoari


Извор

 Ознака стандарда
Језик
Статус
Датум
Бр. страна
Цена
 
Купи
Engleski
Повучен 
25.07.2012 . 
86 стр.
4920 RSD 
PDF
Oprema pod pritiskom za sisteme za hlađenje i toplotne pumpe - Deo 1: Posude - Opšti zahtevi
Engleski
Повучен 
25.07.2012 . 
30 стр.
3080 RSD 
PDF
Oprema pod pritiskom za sisteme za hlađenje i toplotne pumpe - Deo 2: Cevi - Opšti zahtevi