Да ли су вам стандарди потребни у вашем послу?
Да
Не
Понекад
Не знам
Укупан број гласова: 7274

Пријавите се!
 

SRPS EN 675:2011

Статус: Објављен
Језик: Engleski
Бр. страна: 14
Датум: 31.10.2011.
Службени гласник: 82/11
Број решења:
Издање:
Веза са међународним стандардима
Ovaj standard je identičan sa:
EN 675:2011   CEN/TC 129
Цена: 1926 RSD

За читање онлајн

Одштампај

Наслов на српском језику

Građevinsko staklo – Određivanje prenosa toplote (U-vrednost) – Metoda merenja protoka toplote

Наслов на енглеском језику

Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method

Апстракт на српском језику

Ovaj standard utvrđuje proceduru merenja za određivanje prenosa toplote kod zastakljivanja ravnim i paralelnim površinama stakla. U svrhu ovog standarda strukturirane površine se mogu smatrati ravnim. Ovaj standard se primenjuje kod višeslojnog zastakljivanja spoljašnjim staklom koje nije propustljivo za zračenje u dalekoj IR oblasti (sa dužinom talasa u opsegu od 5-50 µm), kao što su proizvodi od natrijum-kalcijumovog stakla, bor-silikatnog stakla i staklokeramike. Unutrašnja stakla mogu biti propustljiva za zračenje u dalekoj IR oblasti. Procedura utvrđena ovim standardom treba da se koristi samo kada se prenos toplote kroz staklo ne može izračunati u skladu sa EN 673.

Апстракт на енглеском језику

This European Standard specifies a measurement procedure to determine the thermal transmittance of glazing with flat and parallel surfaces. For the purpose of this Standard, structured surfaces may be considered to be flat.. This European Standard applies to multiple glazing with outer panes which are not transparent to far infrared radiation (in the wavelength range 5 to 50μm), which is the case for soda lime silicate glass products, borosilicate glass and glass ceramics. Internal elements can be far infrared transparent. The procedure specified in this European Standard determines the U value (thermal transmittance) in the central area of glazing. The edge effects due to the thermal bridge through the spacer of an insulating glass unit or through the window frame are not included. The edge effects due to the thermal bridge through the spacer of an insulating glass unit or through the window frame are excluded. Energy transfer due to solar radiation is also excluded. The procedure specified in this European Standard should be considered only when the thermal transmittance of the glazing cannot be calculated in accordance with EN 673. The determination of the thermal transmittance is performed for conditions which correspond to the average situation for glazing in practice. NOTE Patterned glass is an example of a glass with a structured surface; For the purposes of product comparison, a vertical position of the glazing is specified (see Clause 10). U values evaluated according to the present standard are used for product comparison as well as for other purposes, in particular for predicting: - heat loss through glazing; - conduction heat gains in summer; - condensation on glazing surfaces; - the effects of the absorbed solar radiation in determining the solar factor (see A.2). Reference should be made to A.3, A.4, A.5 or other European Standards dealing with heat loss calculations for the application of glazing U values determined by this Standard. The determination of the thermal transmittance is performed for conditions which correspond to the average situation for glazing in practice. NOTE Patterned glass is an example of a glass with a structured surface;

Комисија за стандарде


ICS



Директиве

Нема информација.

Национални пропис

Нема информација.

Национална активност

Нема информација.

Дескриптори

određivanje, građevinsko staklo, prenos toplote, instrumenti za merenje, tehnike merenja, toplotna izolacija, U-vrednosti, prozori, koeficijent prenosa toplote