Да ли су вам стандарди потребни у вашем послу?
Да
Не
Понекад
Не знам
Укупан број гласова: 7428

Пријавите се!
 

SRPS EN 682:2007

Статус: Објављен
Језик: Srpski
Бр. страна: 21
Датум: 22.03.2007.
Службени гласник: 33/07
Број решења:
Издање: 1 ED
Веза са међународним стандардима
Ovaj standard je identičan sa:
EN 682:2002   CEN/TC 208
Цена: 3102 RSD

За читање онлајн

Одштампај

Наслов на српском језику

Elastomerne zaptivke - Zahtevi za materijale zaptivki koje se koriste za cevi i fitinge kroz koje protiču gas i tečni ugljovodonici

Наслов на енглеском језику

Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

Апстракт на српском језику

Ovim standardom utvrđuju se zahtevi za elastomerne materijale koji se koriste za zaptivke cevovoda, fitinga, pomoćnih dodataka i ventila, pri temperaturama od -5°C do 50°C, za gasovita goriva i tečne ugljovodonike sa sadržajem aromatičnih jedinjenja do 30%(v/v).

Апстракт на енглеском језику

This European Standard specifies requirements for elastomeric materials used in seals for supply pipes and fittings, ancillaries and valves at operating temperatures in general from - 5 °C up to 50 °C and in special cases from - 15 °C up to 50 °C, for the following: General applications (see Table 4, type G) a) gaseous fuel (manufactured, natural and liquefied petroleum gas [LPG] in gaseous phase); b) hydrocarbon fluids with aromatic content up to 30 % (V/V), including LPG in liquid phase. Special applications (see Table 4, type H) Materials suitable for carrying gaseous fuels containing gas condensates and hydrocarbon fluids of unrestricted aromatic content. General requirements for finished joint seals are also given; any additional requirements called for by the particular application are specified in the relevant product standards taking into account that the performance of pipe joints is a function of the seal material properties, seal geometry and pipe joint design. This European Standard should be used where appropriate with product standards which specify performance requirements for joints. This European Standard is applicable to joint seals for all pipeline materials including iron, steel, copper and plastics. In the case of composite seals requirements in 4.2.8 and 4.2.9 apply only when the materials used for any elastomeric parts come into contact with gaseous fuel or hydrocarbon fluid. Elongation at break, tensile strength, compression set and stress relaxation requirements for materials of hardness categories 80 and 90 apply only when they constitute that part of the seal which participates directly in the sealing function or in long term stability. This standard is not applicable to the following: a) seals made from cellular materials; b) seals with enclosed voids as part of their design; c) seals with requirements of resistance to flame or to thermal stress; d) seals which contain splices joining pre-vulcanised profile ends.

Комисија за стандарде


ICS



Директиве



Национални пропис

Нема информација.

Национална активност

Нема информација.

Дескриптори

elastomer;zaptivka;zahtevi;cevovod;gas;tečni ugljovodonik